Apogee Jam X (Pre-Owned)
Availability:
Type:
Call for Availability
Pre-Owned
Polar pattern (all mics): Cardioid
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
Filter (STC-10 only): Linear/75Hz
Freq. response: 20Hz - 20kHz (DM-1B), 30Hz - 20kHz (DM-1S & 1T, STC-10)
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
8mV/Pa -42dB ±2dB (DM-1S & 1T),
11mV/Pa -39dB ±2dB (STC-10)
Impedance (all mics): ≤200 Ohms
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
Power sources (all mics): 48V ±4V phantom power required
Connector (all mics): 3-pin XLR
Dimensions: 144 x 72 x 72mm (DM-1B),
91 x 22 x 22mm (DM-1S & 1T),
150 x 21 x 21mm (STC-10)
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
Input: 1/4'' mono audio jack (impedance 500k)
Outputs: 1 x 1/4'' mono audio jack (impedance100Ω)
Effects Send: 1/4'' mono audio jack (impedance100Ω)
Effects Return: 1/4'' mono audio jack (impedance 500k)
USB: Type-B Female Connector
Sampling accuracy: 24bit
Signal to noise ratio: 103dB
Effects Loop: Mode 1 Serial ~ Mode 2 A/B
MIDI IN & OUT: 5 pin DIN connector
Sampling rate: 88.2KHz
Power requirements: 9V-12V DC 1A
Dimensions: 230mm x 130mm x 54mm
Weight: 1.18Kg
Accessories: 1 x USB Cable
Format: .WAV
Sampling rate: 44.1KHz
Sampling accuracy: 24bit
Max sample length: 23.2ms/1024 Points
THE MOST portable solution to record a line-in instrument like a guitar.
ProMusicals © 2020
Made with ♡ by iTGS
Reviews (0)