Erisa Neogy Custom (Pre-Owned)

0 reviews

Product Code:
Availability:
Type:

Erisa Neogy Custom (Pre-Owned)
Call for Availability
Pre-Owned

Description Specifications Videos Specifications Videos Reviews (0)

Transducer Type	Condenser
Capsule Size	1.34″ / 34mm (dual-capsule)
Diaphragm Size	1.04″ / 26.4mm
Capsule Diaphragms Thickness	3µm
Electronics Type	Solid-state, electronically-balanced output
Output Impedance	200Ω
Max SPL	appx. 135dB
Frequency Response	20Hz-20000Hz
Equivalent Noise Level	<=14dBA (A-weighted)
S/N Ratio	>=80dB (Ref. 1Pa A-weighted)
Output Connector	Male XLR 5-pin, gold-plated
Finish	Polished nickel trim / High-gloss Pinot Noir
Weight (microphone)	1.11 lbs / 0.50kg
Weight (in case)	9.43 lbs / 4.28kg
Dimensions (microphone)	9.41″ long, 1.82″ max diameter / 239mm long, 46.25mm max diameter
Dimensions (case)	16.92″L x 12.60″W x 6.02″H / 430mmL x 320mmW x 153mm
Voltage Requirement	Phantom Power (+48V ideal)

Transducer Type	Condenser
Capsule Size	1.34″ / 34mm (dual-capsule)
Diaphragm Size	1.04″ / 26.4mm
Capsule Diaphragms Thickness	3µm
Electronics Type	Valve/Tube, Transformer-Coupled Output
Output Impedance	200Ω
Max SPL	134dB (144dB with pad)
Frequency Response	20Hz-20000Hz
Equivalent Noise Level	13dB (A-weighted)
S/N Ratio	82dB (Ref. 1Pa A-weighted)
Sensitivity	-35dBV
Output Connector	Male XLR 7-pin gold-plated
High-Pass/Rolloff Switch	125Hz (6dB/octave)
Attenuation/Pad Switch	-10dB
Finish	Polished nickel trim / High-gloss Pinot Noir
Weight (microphone)	1.07 lbs / 0.48kg
Weight (in case)	11.67 lbs / 5.29kg
Dimensions (microphone)	8.18″ long, 1.98″ diameter / 208mm long, 50.5mm diameter
Dimensions (case)	16.73″L x 12.80″W x 5.25″H / 425mmL x 325mmW x 142mmH
Voltage Requirement	110-240V

This is an HSS guitar that I had custom made by master luthier Erisa Neogy in Auroville in 2010 (near Pondicherry) It features a Hipshot fixed bridge that's extremely comfortable for the right hand, two Fender Custom shop single coil pickups and a GnL humbucker. A very comfortable neck and compound radius fretboard.
I've had a few changes made to the guitar over the years, I had a Graphtech MIDI system installed for a while then removed, which is why you see a few extra holes made for the midi/piezo controls. I've had DiMarzio pickups in this guitar when I first got it then swapped those out for the pickups that are currently in the guitar.
The guitar served me well for a time and now I'm not playing it much. I would rather sell it than to keep it lying unused indefinitely.

Specs:
Construction - Bolt on
Body - Red Cedar
Top -   Acacia
Neck/head - Vengai
Fretboard - Satinwood
Radius -      Compound
Neck PU -   Fender custom shop fat 50ts
Middle PU - Fender custom shop '69
Bridge PU - G&L AW4370C Humbucker
Pickup selector - Schaller Megaswitch
Bridge - Hipshot fixed bridge
Tuners - Grover Mini Rotomatic
Nut    -   Bone
Strings - D'addario gauge .10