Audient iD14 (Pre-Owned)

SUPPORTED SAMPLE RATES

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

MICROPHONE INPUTS

Frequency Response: 20Hz - 20kHz +0.5/-1.5dB

Dynamic Range: 109 dB (A-Weighted)

THD+N: <0.001%

Noise EIN: -127 dBu

Maximum input level (without pad): +8 dBu

Maximum input level (with pad): +16 dBu

Gain Range: 50 dB

Input Impedance: 3 kΩ

LINE INPUTS

Frequency Response: 20Hz - 20kHz +0.5/-1.5dB

Dynamic Range: 109 dB (A-Weighted)

THD+N: <0.002%

Maximum input level: +22 dBu

Gain Range: 50 dB

Input Impedance: 49 kΩ

INSTRUMENT INPUTS

Frequency Response: 20Hz - 20kHz +0.5/-1.5dB

Dynamic Range: 108 dB (A-Weighted)

THD+N: <0.01%

Maximum input level: +13 dBu

Gain Range: 50 dB

Input Impedance: 1 MΩ

LINE OUTPUTS

Maximum Output Level (0 dBFS): +16dBu @ 0dBFS, or >21dBu where ADAT output is not used

THD+N: <0.001%

Ouput Impedance: 136 Ω (Balanced)

• Transducer Type:Condenser

• Acoustic Operating Principle:Pressure Gradient

• Frequency Response:20Hz – 20kHz (+/-3dB)

• Equivalent Noise Level:14dB A-Weighted

• Sensitivity at 1kHz into 1kohm:23.7mV/Pa

• Maximum SPL for THD 0.5%:138dB

• Signal-to-Noise Ratio (rel. 94dB SPL):80dB A-Weighted

• Polar pattern:Omni/Cardioid/Figure-of-Eight

• Pad Switches:-20dB/-10dB/0dB

• Low-Cut Filter:80Hz

• Product length:175 mm / 6.89 in

• Product width:54 mm / 2.13 in

• Product weight:625 g / 1.38 lb

"Audient ID14 MK1

2019 purchased

High-performance USb Audio Interface.

2X Class-A Audient Mic Preamps.

12VDC Adapter For Phantom Power.

"